DTF- 30" Mimaki TxF150/300-75 Heat Transfer Printing System

SKU: DTF-Print-System-

31.5" Wide Printer DTF System Package
w/Adhesive Shaker and Curing Unit
150 Series- 1 Print Head 2.6 M²/Hr. (29sqft/hr.)
300 Series- 2 Print Heads 7.5 M²/Hr. (80sqft/hr.)

The Mimaki TxF150/300-75 Printer uses groundbreaking ink technology circulating through the damper. In addition, the nozzle detection and ink consistency are better than other brands and models, making it the best in the DTF market. And, it's the only printer with a 31.5" print area! You can choose different models based upon output speed capacity: Model 150- 1 Print Head 2.6 M²/Hr. or Model 300- 2 Print Heads 7.5 M²/Hr.

With purchase the Mimaki TxF150/300-75 DTF Printer, you'll receive onsite installation and training by our Mimaki-certified technicians. In addition, support is ongoing, so if you run into an issue down the road, we will make sure you are up and running again as quickly as possible

- Equipped with the newest version of Mimaki Circulation Technology (MCTv2) that prevents white ink sedimentation by constantly circulating the ink
- Degassed aluminum ink pack prevents nozzle clogging by reducing oxygen and other gases from mixing with the ink
- Nozzle check unit (NCU) & Nozzle Recovery System (NRS) checks for clogged nozzles and automatically performs nozzle cleaning and replacement without interrupting printing.
- New pinch roller system for stable media feeding of DTF film
- 3-way intelligent heater for blur-free image quality
- Thermal transfer pigment ink PHT50 is ECO PASSPORT certified ink

What's Included:

31.5" Wide DTF shaker dryer w/ fume extractor
Two day onsite setup and training
Inks, powder, and film to get started
1-Year complete coverage warranty - includes printheads and onsite support if needed

Requirements:

A/C 220v 20amps Regulated L6-20 Style outlet (dryer)
2 Dedicated circuits (1- 110V for printer and 1- 220V for dryer)
Climate control set to 70-75 degrees and 40 - 60% humidity
Typical learning time is 6 - 20 hours over a period of 1 week.

Important Notes:

Do not book any print jobs or sell any services until you've received your printer and have learned how to use it.
General understanding of a graphic programs like Adobe Photoshop, Illustrator or Coreldraw is a must.
Basic computer skills are required.
There is a software, hardware and process learning curve. Please allow yourself time and supplies to master it.
Dryer must be vented to the outside with exhaust fan. Fumes are harmful.
The dryer will not fit through a standard 34-36" door.
Customer must keep shipping crate in case the printer needs send back for service.