DTF- 24" Roadrunner II / Mongoose III DTF Printer Packages

The all-new Roadrunner II and Mongoose III 24" DTF printers are a leap forward in direct-to-film printing technology. Combining high-quality components, reliable Dupont inks, and industry-leading Digital Factory software to create a solid printing solution for your transfer printing business.

These transfers can be heat applied to many items, including shirts, hats, shoes, bags, leather, wood, denim, canvas, and more.

Features:

• 24" Wide printing width
• Roadrunner II has four Epson i3200 Printheads (CMYK - WWWW)
• Mongoose III has two Epson i3200 Printheads (CMYK - WWWW)
• Higher precision manufacturing for better alignment
• Backlight for quality control of printing
• Sleek, clean, modern design
• White ink roller for preparing the next bottle of ink
• Touchscreen controls for white ink Circulation, stirring functions, vacuum, pinch rollers, ink roller, heaters, lights, and ink level readouts.
• Easy-to-use menu for printer functions
• Film tension system for more consistent feeding
• Easy to install film roller
• Easy access to all pumps and circuit boards

Technical Specs:

• 6 Pass and 8 Pass Print Resolution 
• RoadrunnerII Output Speed: 150+ 10"x10" prints per hour
• Mongoose III Output Speed: 75+ 10"x10" prints per hour
• 1 Liter per color ink bottle capacity
• Easy access doors
• Printer: 64" wide x 34" deep x 57" high

What's Included:

• Roadrunner II 24" Four Head Printer
• BMAC Industries Super Shaker 
• 2 Day onsite installation and training by a Certified Technician
• CADlink Digital Factory 11 RIP Software for PC
• DuPont Artistri ink, V2 powder, and V2 film
• 1 year Limited Printer Warranty
• 2-year Dupont Printhead Warranty 
• USA-based support via phone and email

What's NOT Included:

• PC: I5 or better CPU, 8 GB ram, 2 hard drives, and a network adapter. 24" or larger monitor

Requirements:

• Printer A/C 110v
• BMAC Super Shaker Electrical requirements: 220V, 30A (L6-30R receptacle)
• Climate control is set to 70-75 degrees and 40 - 60% humidity
• Typical learning time is 6 - 20 hours over a period of 1 week.
• Vent to the outside with an exhaust fan and/or use a fume extractor.

 WHAT YOU NEED TO KNOW BEFORE BUYING A DTF PRINTER

Training: 
Training is included. We send a technician to your location for 2 days of setup and training. 

Fume Extraction: Please note that fume extraction is essential when using the Shaker/Dryer. Due to the hazardous nature of the fumes, DTF printing and heat pressing should be performed in a well-ventilated area.

Powder Handling: Inhalation and skin exposure to uncured powder adhesive can pose a health risk. Wear proper respiratory protection and gloves when handling the powder